Adding a new disk to a VMWare Virtual Machine in Linux

http://www.matttopper.com/?p=25


Home Papers and Presentations About Me
Oracle Stuff and My Thoughts on Other Tech TopicsAdding a new disk to a VMWare Virtual Machine in Linux
Bloged in VMWare, Technology, General by Topper Sunday May 7, 2006


I’ve been using VMWare for a while now and I always get asked some common questions about it. One of those is how to add a new virtual disk to a Linux virtual machine. So in response to that, here are the steps to adding a new SCSI based virtual disk to a CentOS Linux virtual machine. The steps for adding a disk to a Windows machine is very much the same except you would use the Disk Management utility from the Control Panel.

Step 1: Open virtual machine settings
Select your virtual machine, as you can see from the photo I selected the Infrastructure virtual machine. Next press the “Edit virtual machine settings’ to open the Virtual Machine Settings dialog.


Step 2: Add new hardware
From the “Virtual Machine Settings” dialog select the “Add…” button at the bottom of the screen. From this dialog you can also modify how much memory you dedicate to the machine when it boots.


Step 4: Select new hard disk
From this screen we can see the many types of hardware we can add to a virtual machine. You can emulate just about any piece of hardware that one can expect in a modern operating system. It definitely makes testing with different configurations and devices much easier. For our example we want to select “Hard Disk” and then select the “Next >” button.


Step 5: Create the virtual disk
In the next screen we see the three options for adding a new disk. We can “Create a new virtual disk”, this will create a brand new disk on the guest operating system. The second option, “Use an existing virtual disk”, allows you to mount a disk from another virtual machine. I like to do this with my “source” drive. I have one virtual disk that I’ve made that has all the Oracle and Linux CDs on it, that way I can just mount it to the machine I need when I have to do a new install instead of copying the binaries I need across disks, its definitely a big time saver. The last option is to “Use a physical disk”, this allows you to mount a local physical disk to the operating system. This option is akin to NFS mounting a drive to a virtual machine. To add a new disk we select the “Create a new virtual disk” option and select the “Next >” button.


Step 6: Select type of disk
Next we want to select the type of disk. I’ve been using VMWare for a long time and agree that the recommended Virtual Disk Type should be SCSI. I don’t know why, but I’ve had much better success with the SCSI virtual disks than the IDE ones. So in this step we want to select “SCSI (Recommended)” and the “Next >” button.


Step 7: Set disk size and options
Now we want to set the size of the disk we are creating. One of the nice features of VMWare is that you don’t have to allocate all of the disk when you create it. So if you create a 40 GB disk it doesn’t have to take it all right away, the disk will grow as your virtual machine needs it. I will say this is a big performance hit you take when the disk has to extend, but for most applications its OK. Also, I will warn that if the virtual disk grows and there is no physical disk left on the host operating system you will see a catastrophic failure and in most cases both the host and guest operating systems lock up and become unusable. (Don’t say I didn’t warn you) Lastly, you can split the files into 2GB sizes, while this isn’t necessary, it just makes all the disks much easier to manage and move around. For this step we want to set our disk size (12 GB in this case), I chose not to allocate the disk space right now (the machine has a 300 GB drive and has only 20 GB on it) and Split disk into 2 GB files.


Step 8: Name the disk file
This is actually pretty simple in that you decide what you want to physically call the disk and where to put it. .vmdk is the extension for VMWare virtual disks. After we name the disk we can select the “Finish” button which adds the disk to the virtual machine.


Step 9: Ensure new disk exists
So now we can see that the new disk has been added to the “Virtual Machine Settings” within the selected virtual machine. From here the disk acts just like it would if you added a new disk to a standalone server. So we select the “OK” button to continue.


Step 10: Boot the virtual machine
From here we just start the virtual machine like we would normally, either by selecting the button on the toolbar or selecting the “Start this virtual machine” link.


Step 11: Virtual machine start up
The machine boots normally as it would any other time.


Step 12: Create the Partition
After we’ve logged in and accessed a terminal window as root (or another user with root/sudo privs) we first want to run fdisk on the newly created drive. In Linux the first SCSI drive is sda, the second sdb, the third sdc, etc. since this was the second SCSI drive we added to the system, the device is known as /dev/sdb
The first command we want to run is fdisk /dev/sdb (NOTE: Thanks to everyone that caught my typo here) this utility works very much like the DOS utility of the old days and allows you to create and manage partitions. To create a new partition we enter the command n to create a new partition. This is going to be a primary partition p, and the first partition number 1. Because I want this disk to consume the full 12 GB I specified earlier we start at the first cylinder and end it at the last cylinder. We then want to write the partition table with the new partition we have just created so we enter the command w which writes the new table and exits fdisk.


Step 13: Format the partition
Now that we’ve create the partition, we now want to format the first with the new file system. I’ve decided to use ext3 filesystem for this disk, ext3 provides all the features of the classic ext2 file system plus journaling which helps to prevent disk corruption in the event of an improper shutdown and speeds up the recovery process. For a good overview of Linux standard file systems check out this article: http://linux.org.mt/article/filesystems So, to format the new partition we enter the command mkfs -t ext3 /dev/sdb1. This command makes a new files system with the type t ext3 on the /dev/sdb1 partition, this is the first partition on the sdb disk.


Step 14: Create the mount point
Determine where you want to add the new virtual disk you’ve created. I like to create a partition specifically for all the software I install after the basic Linux install called /software to do that we run mkdir /software, just a simple make directory command. Once that is complete we then want to mount the newly created partition. Because we haven’t added the partition to the /etc/fstab yet we have to mount it manually. To do that we run mount -t ext3 /dev/sdb1 /software. To break down this command we run mount with the ext3 filesystem type, the partition /dev/sdb1 to the directory /software. Pretty simple and straight forward. To check that the partition is properly mounted we run df -k which shows us the mounted partitions and the amount of available space.


Step 15: Open the fstab file
The fstab file holds all of the used disks and partitions, and determines how they are supposed to be used by the operating system. So we edit the file to add the newly created partition
http://www.matttopper.com/images/blog/adding_disk_to_vmware/15.jpg

Step 16: Modify the fstab for the new partition
After we open the fstab file in the previous step we add the following line:
/dev/sdb1 /software ext3 defaults 1 1
The first column is the partition name, the second is the default mount point, the third is the filesystem type. The fourth is the mount options, in this case I used default which mounts the drive rw, suid, dev, exec, auto, nouser and asynchronous. The 5th and 6th options are for the dump and fsck options. If dump is set to 1 the filesystem is marked to be backed up, if you are going to have sensitive material on the drive its a good idea to set it to 1. If fsck is set to greater than 1, then the operating system uses the number to determine in what order fsck should be run during start up. If it is set to 0 it will be ignored such as in the case of a cdrom drive since its a solid state disk. For more information on the fstab file check out this article: http://www.tuxfiles.org/linuxhelp/fstab.html
Lastly, we write and quit the file with the :wq command.


So now that the fstab has been written the drive will be mounted and unmounted when the machine is either started or shutdown. So there you have it, the quick and dirty process for adding a brand new disk to a virtual machine. Until next time…

ShareThis


Trackback ·
Close
Forgot password?
Please put in your email: Send me my password! Close message
This blog postAll blog postsSubscribe to this blog post's comments through...

RSS Feed
Subscribe to this blog's comments through...

RSS Feed
Follow the discussion Login CommentsSort by: Date Rating Last Activity

Close
Login to an existing account
Email: Password: Use OpenID! Forgot login? Login Close
Login with your OpenID
OpenID URL: Back Login Dashboard | Edit profile | Logout Logged in as 0Vote upVote down RishiD Hey,

Just wanted to say thanks for the tutorial.

Worked great. Post reply » 9 weeks ago
This comment has 0 hidden replies. Show them! 0Vote upVote down Stan Raichlen I agree: Nice complete and very useful tutorial. I have found several sites previously, but none of them met my needs prior to this site. Thanks! Post reply » 8 weeks ago
This comment has 0 hidden replies. Show them! +1Vote upVote down Rick Karcher • 1p Thanks Matt !! Great Tutorial , could It be possible to replace for example the /var partition and to add a new /var with more space and copy all the content to the new /var partition ?
Thanks ,
Regards . Post reply » 8 weeks ago
This comment has 0 hidden replies. Show them! 0Vote upVote down Eric Thanks Matt. I kinda knew what I had to do but couldn't see the /dev/sdb that I added. I rebooted the server and it showed up. It's always nice to find a howto for EXACTLY what you are doing. :) Post reply » 7 weeks ago
This comment has 0 hidden replies. Show them! 0Vote upVote down Albin Thanks Matt. It's exactly what I need. Post reply » 7 weeks ago
This comment has 0 hidden replies. Show them! 0Vote upVote down Geoffrey useful tutorial, thanks ! Post reply » 7 weeks ago
This comment has 0 hidden replies. Show them! Thread active 4 weeks agoCollapse thread Expand thread 0Vote upVote down Josef Thanks for this Matt. It is very helpful.

God bless! Post reply » 5 weeks ago
0Vote upVote down Gregg Rask These directions are great. I ran into an issue. A new disc was created pointing to /opt/software and when installing into the directory that relates to the newly created disc the / directory is consumed instead of the /opt/software directory structure.
What are your thoughts? Post reply » 4 weeks ago
This comment has 1 hidden reply. Show it! 0Vote upVote down JoseT Thanks Matt! This is what I was looking for to jog my memory, been awhile since I had to add disks to my VM's! Post reply » 3 weeks ago
This comment has 0 hidden replies. Show them! 0Vote upVote down satyanarayana Thank you it helped. Post reply » 3 weeks ago
This comment has 0 hidden replies. Show them! Thread active 3 weeks agoCollapse thread Expand thread 0Vote upVote down Abdul Mateen you are great Matt!!.. this tutorial really helped me.. Post reply » 3 weeks ago
0Vote upVote down Erez thanks a lot! great tutorial and great help Post reply » 3 weeks ago
This comment has 1 hidden reply. Show it! 0Vote upVote down Meng Thans very very much... Your tutorial very very helpful Post reply » 1 week ago
0Vote upVote down Jack THANKS! Post reply » 6 days ago
This comment has 0 hidden replies. Show them! 0Vote upVote down Ntseh Sweet! Easy to read and follow. Post reply » 5 days ago
This comment has 0 hidden replies. Show them! Post a new comment
(Logout)Enter text right here! Name * Email (track replies) Blog URL Claim my comments! Why? | Login Your OpenID * Claim my comments! Why? | Login Submit Comment Or post using OpenID Go back Get better comments for your blog Go to Intense Debate Posting AnonymouslyEnter text right here! Name * Email (track replies) Blog URL Claim my comments! Why? | Login OpenID URL * Claim my comments! Why? | Login Cancel | Submit Comment Or post using OpenID Go back






About Me

Matt Topper
Email: matt@matttopper.com
Phone: 586.855.4595










Disclaimer
The views expressed on this blog are my own and do not necessarily reflect the views of Oracle.

Calendar
April 2008 S M T W T F S
« Jan
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30


Categories
Auto Industry
BI Server
BIEE
Business Intelligence
Data Integrator
Discoverer
General
Identity Management
MapViewer / GIS
Music
ora-click
Oracle
Oracle Access Manager
Oracle Adaptive Access Manger (OAAM)
Oracle Identity Manager
Oracle Virtual Directory
Personal
Portal
Technology
VMWare


Archives:
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
June 2007
May 2007
April 2007
March 2007
January 2007
October 2006
September 2006
July 2006
June 2006
May 2006
April 2006
November 2005
October 2005
September 2005
August 2005
June 2005
January 2005
December 2004
Links
Meta:
Login
RSS
Comments RSS
Valid XHTML
WP

Copyright © 2004 - 2006 Matt Topper 22 queries. 0.923 seconds.